Новости компаний [4] |
Новости строительства [113] |
Что-то заработало неправильно. Главная страница
Строительная информация: Plastering of facades in a residential building should be carried out after the completion of the main construction works, with terazim mortar. All wooden parts - after the end of construction, it is necessary to proceed with the addition of a small amount of paint for subsequent painting with oil paints. Plaster base - terazim solution. Wooden elements of the balcony, stairs - painted with oil paints. Entrance doors, window openings will be painted with oil paint 2 times. Internal work must be carried out after covering the roof and glazing the windows. The internal plastering of the walls is performed with lime-sand mortar M-4, the ceiling is plastered with cement mortar. The ceiling and the inner surfaces of the walls are painted with water-glue mixtures. In the bathroom and toilet, a panel with glazed tiles is arranged at h - 1.80 and h - 1.20 m. Relative to the floor level, the walls in the pantry are whitewashed with lime mortar. The floor - in the rooms and the hallway - parquet on the logs on brick columns on the 1st floor, on the 2nd floor on reinforced concrete panels on the rough floor, in the kitchen, in the corridors, the pantry - wooden planks on the logs laid on the brick columns; in the boiler room, in the bathroom and in the bathroom - from Metlach tiles on a concrete base.
Факт о строительстве: The top is designed as a two-pitched roof made of wooden rafters. Rafters are made of pine of the second category with a moisture content of no more than 20%. Sections 100х100 mm. The rafters are attached to the walls with wire coils of 3.6 mm, which are fixed in the wall with brackets. Pidkrokvenna system is made from a beam with a section of 160х160 mm. The slopes of the roof are hemmed with 20 mm planed boards. The roof is corrugated asbestos-cement sheets of a unified profile on a crate. Carpentry products - individually made. The boards are wooden.